Production line equipment for prestressed concrete poles

Prestressed concrete power poles are mainly composed of steel and concrete, which are widely used as overhead struts in electric power, communication, railroad, petroleum and other industries because of their long service life, low cost, easy assembly, small cross-section size and strong resistance to wind and ice and snow loads.

The length of prestressed concrete poles is generally 7-15 meters, or we can design the mold according to your requirements.

Main features:

1. Continuously absorbing the advantages of similar advanced products at home and abroad, we constantly improve and enhance the design rationality, production convenience and production economy of our production, and constantly maintain the leading position of our production line in this field.

2. The main component of pre-stressing electric pole production line: mold, which is characterized by easy transportation, quick assembly, accurate positioning, good overall rigidity and smooth running.

3. Another major component of the Prestressed Electric Pole Production Line equipment: the Prestressed Concrete/Electric Pole Centrifuge is designed and manufactured for centrifugal reinforced concrete pipes for single-mode spinning of large-diameter pipes and multi-mode spinning of small and medium-sized molds. The machine is fully customized and can be supplied with specifications based on the end user's application. It has several important features as follows:

    a). Unique "slot" design with snap-in solder and bolt limits to change the screw limits between the bearing housing and the base plate. The top and bottom sides of the spinner panel, the lower surface and both sides of the bearing housing are finish machined.

    b). The connecting shaft is a whole shaft to avoid the stress concentration caused by the change of shaft diameter, resulting in the phenomenon of "broken shaft".

    c). The limit side of the support wheel is removable. It is easy to be replaced by the user.

    d). The centrifuge frequency conversion cabinet records the process parameters of each pipeline and outputs reports, and provides office computer data communication interface.

4. The tensioning equipment used in the pre-stressing electric pole production line equipment only requires the user to input the number and diameter of reinforcement bars in advance, and the machine will automatically generate the tensile strength, and the machine will automatically stop when it reaches the user's rated tensile strength, and it can store the parameter records of the products in each shift for archiving and sampling. The tensile length can refer to the scale range. Hydraulic control of forward and backward, up and down movement, safe, reliable and quick response. Left and right movement is controlled by motor. The main electrical device of the machine is controlled by the console and equipped with remote control cable buttons for easy operation.

5. Other equipments required for the pre-stressing electric pole production line, such as traveling crane, transportation trolley, feeder, mixing station, steam curing tank, boiler room, finished product automatic piling system, coiling machine, etc. are all made by the domestic famous and stable and reliable quality supplier equipment or our factory, with reliable and stable after-sale guarantee, which makes the users feel comfortable and relieved.

6. The production process flow chart of prestressed electric pole production line is as follows: